This flashcard is just one of a free flashcard set. See all flashcards!

Follow the given steps carefully for the Wavlink wifi 6 router setup. Here are the general steps to set up your Wavlink WiFi 6 router:

1.Connect the router to your modem: Connect the Ethernet cable from the modem to the WAN port on the router.
2.Power on the router: Plug the power adapter into the router and turn it on.
3.Connect to the router's network: Connect your device to the router's network using the default SSID and password that came with the router.
4.Access the router's web interface: Open a web browser and enter the default IP address for the router in the address bar. The default IP address is usually 192.168.0.1 or 192.168.1.1.
5.Log in to the router's interface: Enter the default username and password for the router. You can find this information in the manual that came with the router.
6.Configure the internet connection: Go to the Internet setup page and enter the details required to connect to your Internet service provider (ISP).
7.Configure the wireless network: Go to the Wireless setup page and configure the SSID, password, and security settings for your wireless network.
8.Save and apply the changes: Save the changes you made to the router's configuration and apply them.
9.Connect your devices to the new network: Connect your devices to the new WiFi network using the SSID and password you configured in step 7.