When terminating, what parts of the chain must be terminated? What parts should not?
Devices mid-chain must not be terminated. Both ends of the SCSI chain must be terminated however. A SCSI host adapter qualifies as a device, so if it is at the end of the chain, it can be terminated.
Modern SCSI devices usually include a jumper or other setting to enable or disable termination.
Modern SCSI devices usually include a jumper or other setting to enable or disable termination.
Tags: 101.1, bus types, hard drives, host adapter, linux, SCSI, SCSI chain, termination
Source:
Source:
Flashcard set info:
Author: Ryan Robson
Main topic: Informatics
Topic: Linux
City: Houston
Published: 08.02.2011
Card tags:
All cards (75)
/dev (2)
/etc (2)
101.1 (36)
acronyms (1)
architecture (1)
ata (2)
bash (1)
BIOS (5)
bios (1)
bit (1)
branch (1)
bus (2)
bus types (7)
cables (1)
clock (3)
codes (1)
commands (7)
configuration (1)
controller (1)
daemon (1)
data rates (1)
dev (1)
device types (1)
devices (5)
dmesg (1)
facilities (1)
fdisk (1)
fork (1)
fs (8)
hard drives (17)
history (1)
host adapter (1)
hwclock (1)
IEEE (1)
ISA (2)
klog (1)
linux (31)
logs (5)
lspci (1)
lsusb (1)
master (1)
modprobe (1)
naming standards (1)
options (1)
packages (1)
partitions (11)
pata (2)
PATA (6)
PCI (2)
pci (2)
priority (1)
proc (3)
RAM (1)
resistor (1)
RPM (2)
sata (3)
SATA (2)
scsi (9)
SCSI (4)
SCSI chain (1)
security (1)
slave (1)
synchronize (1)
syslog (4)
termination (2)
time (4)
type codes (2)
umount (1)
USB (1)
x86 (6)
